The SP slurry pump is a Warman vertical slurry pump. These pumps and their spares are interchangeable with the Warman SP pump. They are designed to transport corrosive, coarse particles, and highly concentrated slurry. It can operate normally without a shaft gland or shaft gland water, and the length of the shaft can be customized to the depth of the liquid level.
The SP pump is a vertical centrifugal slurry pump. The inlet is oriented vertically and downward on one side of the pump, and the outlet is oriented vertically and upward on the other side. It composed of the lower filter platform, pump body, impeller, shaft, guard plate, and bracket. The upper part of the sp pump is supported by bearings; the pump is installed under the liquid, and no shaft seal is used. It uses a belt drive (BD) and direct drive (CD) transmission type. The depth of the immersion liquid in the standard size range can be adjusted according to the needs of the user.
The SP slurry pump is widely used in mining, power, metallurgy, coal, dredging, building materials, and other industrial lines to pump concentrate, tailings, sludge, and other abrasive and high-density slurries.
1. Employs a vertical cantilever type, single pump casing structure.
2. Employs a double-suction, semi-open impeller design, using hard alloy or rubber impeller.
3. Cylindrical bearing assembly installed, using a high-capacity bearing design, and the bearing is lubricated with grease.
4. The gap between the impeller and the guard can be adjusted to ensure the efficient operation of the pump.
5. No shaft seal required.
6. The SP slurry pump and driver can be driven by direct coupling or a V-belt transmission.
7. The RVS type adopts rubber over-flow parts and rubber lining for parts that are in contact with the slurry, to prevent a breakdown in strong corrosive conditions.
For more models, please feel free to contact us.