Horizontal slurry pump

AH, M, HH series slurry pump is types of horizontal Warman pump. Slurry transportation is at the heart of a successful mine site operation, making it crucial for your pumping equipment to be up to the task. AH, M, HH series Warman pumps also provides a complete selection for most duties in the mill, from the cyclone feeds to regrind, flotation and tailings.

A wide variety of impellers and shaft seals provide a perfect fit for a wide range of applications. The pump provides excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. It offers extended wear life, reduced maintenance, outstanding availability and high performance pumping across mining, chemical, and industrial applications. Designed to offer high performance, reliability and low total cost of the owner, our Warman pump replaced will solve your slurry problems and improve your slurry transportation process and save you more operating costs.

Type AH(R), HH, M(R) Warman pump are widely used in handling abrasive or corrosive slurry in the metallurgical, mining, coal, power, building material, and other industrial departments etc,   for a range of mill duties, from dirty water to the most difficult water flushed crusher services, large particle slurries, gravel and many abrasive applications.

1. The spares of the Warman pumps replaced can be changeable with Warman original. Also, the wetted parts’ material can be optional as metal, rubber, PU or ceramic according to the application.

①Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.

②Volute Liners-easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomer.

③Elastomer seal rings back all liner joints.

④Pump Case–Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.

⑤Impeller–front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are completely interchangeable.

⑥Cast in impeller threads requires no inserts or nuts. High efficiency and high head designs are also available.

⑦Throatbush–wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

⑧One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly.

⑨An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance

2. The shaft seals for the pumps can be adoptable of gland seal, expeller seal or mechanical seal
3. The discharge can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.

For more models, please feel free to contact us.